 |
1. Complete removal of the existing roof system including tile, shingles, asphalt sealants, asphalt paper, boots, vents, and fasteners. Prepare any tie-in areas to existing roofs for reroof application. |
 |
 |
2. Remove and replace any and all rotted roof sheathing throughout entire roof area. |
 |
 |
3. Remove and replace any and all rotted fascia board. |
 |
 |
5. Install self-adhered ice & water shield underlayment at all flashing areas and top layer of the entire roof deck. |
 |
 |
8. Install new velux self-flashed, all-in-one, leak proof, skylight(s) over existing opening(s), fastened and masticsized, where applicable. |
 |
![]() |
9. Install new lead boots over plumbing stacks and vents over exhaust areas, fastened and masticsized, where applicable. |
![]() |
![]() |
10. Install new pre-painted drip edge flashings entire perimeter of roof, fastened and sealed. |
![]() |
![]() |
11. Install new valley metal down all valley areas, fastened and sealed, where applicable. |
![]() |
![]() |
12. Paint all boots and vents to match tile color, where applicable. |
![]() |
![]() |
13. Install new attic ventilation, fastened and sealed, where applicable. |
![]() |
![]() |
14. Install tile to the entire roof area adhered using adhesive, stainless steel screws or in some applications both. |
![]() |
![]() |
15. Install cap tiles at all hip & ridge areas using adhesive cement / mortar to achieve the highest wind resistance. |
![]() |
![]() |
16. Clean up and remove all debris. Use magnet to remove fasteners from lawn.
|
![]() |
